Birch plywood 375x250x1.5mm Model building

Name: Birch plywood 375x250x1.5mm Model building
Brand: Whole Wood
SKU: FH95109
Price: 11.95 EUR
Availability: InStock

€11.95 Tax included

This thin 3-layer birch veneer panel has a very light color. It's ideal for model-building and model-making.

For decorative purposes, this plywood panel can be used to cover a surface for aesthetic appeal. It can also be engraved or laser-cut. For renovation, this veneer can be used to restore surfaces. For craftsmen, birch plywood can be used to create small objects.

Veneer panel dimensions: 37.5 x 25 cm

Plywood thickness: 1.5 mm

Veneer wood species: birch

Panel structure: 3-layer glued plywood

Birch panel finish: unfinished

Birch panel quality: AB/B

Veneer panels are for indoor use only.

Quantity

En stock

___

Here are the steps and techniques for placing veneer on a roll:

Prepare the surface. The surface on which you're going to glue the veneer must be clean, smooth and free of dust and grease. Sand the surface if necessary to make it smooth.
Choose a glue suitable for the wood and substrate (vinyl, neoprene or polyurethane glue).
Apply the glue to the surface on which you'll be gluing the veneer. You can use a brush, roller or spatula (or glue gun). The entire surface of the wood should be glued. Not too much, to avoid excess and drips.
Place the veneer on the surface, aligning edges and corners. Remove air bubbles if necessary.
Use an iron or roller to press the veneer to the surface. Leave the weight on for the duration of the drying time.
Allow to dry. This may take several hours or even days, depending on the type of glue you've used.
Finish the job by cutting off any protruding ends with scissors or a cutter. Finish the surface and corners with fine-grain sandpaper (from 180)