copy of Oak veneered MDF panel 1200x600x5mm

Name: copy of Oak veneered MDF panel 1200x600x5mm
Brand: Whole Wood
SKU: FH95008
Price: 55.95 EUR
Availability: InStock

€55.95 Tax included

This oak veneered MDF panel has an extraordinary look. It's ideal for engraving and laser-cutting.

For decorative purposes, this oak paneling can be used to cover a surface for aesthetic appeal. For renovation, this veneer can be used to restore surfaces. For craftsmanship, veneer is used to create small furniture and other small objects.

Veneer panel dimensions: 120 × 60 cm

MDF panel thickness: 5 mm

Veneer wood type: oak

Panel structure: MDF

Oak panel finish: unfinished

Oak veneer panel quality: A/B (cabinetmaking)

Wood certification: FSC label

Veneer panels are for interior use only.

Quantity

Last items in stock

___

Here are the steps and techniques for placing veneer on a roll:

Prepare the surface. The surface on which you're going to glue the veneer must be clean, smooth and free of dust and grease. Sand the surface if necessary to make it smooth.
Choose a glue suitable for the wood and substrate (vinyl, neoprene or polyurethane glue).
Apply the glue to the surface on which you'll be gluing the veneer. You can use a brush, roller or spatula (or glue gun). The entire surface of the wood should be glued. Not too much, to avoid excess and drips.
Place the veneer on the surface, aligning edges and corners. Remove air bubbles if necessary.
Use an iron or roller to press the veneer to the surface. Leave the weight on for the duration of the drying time.
Allow to dry. This may take several hours or even days, depending on the type of glue you've used.
Finish the job by cutting off any protruding ends with scissors or a cutter. Finish the surface and corners with fine-grain sandpaper (from 180)